Lightweight Kevlar reinforced OEM replacement gas tanks.

Attention Ducati owners!

 

Desmosedici Rear Hugger

 

We are now offering a CARBON rear hugger fender for the Ducati Desmosedici model.

In response to our customers, we have designed this model following the MotoGp styling ques of the GP8 providing the same high standards as our world class fuel tanks. Unlike the Ducati performance offerings our fender allows Desmo owners to complete the look of their bike and retain their chain guard. We  also provide Titanium hardware to secure it on your swing arm.

 

We are  currently working on a FuelCel tank with increased capacity for this model.

 

ANTI-SLOSH FOAM BAFFLING

FuelCel Foam is a special open-cell sponge-like material which only reduces the tanks volume by about 2 percent. With slightly smaller porosity than other brands, FuelCel Foam controls slosh better. When used with our Kevlar fuel tanks, FuelCel Foam helps suppress explosion, absorb impact energy and most importantly, CONTROL FUEL SLOSHING.  This is the same material used in military jet aircraft for decades.

Fuel sloshing in a Sportbike, Dualsport, MX-bike, ATV, Watercraft or Snowmobile is a significant factor in upsetting the center of gravity due to the violent positive and negative accelerations that are imposed during riding, and especially racing. This sloshing acts like a heavy uncontrolled weight that has to be compensated by your skill and suspension system. It's something like a liquid monkey constantly playing havoc with your handling, or like a passenger that doesn't know how to ride on the back. With a half tank of fuel, (common for most sprint races assume 3 gallons), that's 18.6 pounds slamming into the front of the tank when brakes are applied. Then slamming to the side after you have established your lean angle in the corners. Then slamming to the back of the tank when you hit the gas. But due to physics, that 18.6lb can act more like 60lb for that initial moment the fuel sloshes to a stop at the ends of the tank!  This will affect the line of travel of your vehicle.

Riders report that installing FuelCel Foam gives the impression that they had their suspension done, even to the point of having to adjust their riding style because they were always making minor adjustments compensating for this fuel slosh. FuelCel Foam will enable you to ride more precise lines on the track or trail. Competitors will experience decreasing lap times. A very small investment to maximize the potential of your vehicle. You can purchase the foam at a significant discount when buying a FuelCel tank, we will even install the foam for you. If you want to fill your own tank you can purchase it in, 1-2-5-8 gallon increments. You only need to fill the tanks volume by about 75% to get the full advantage that this simple technology affords. Just take your tanks volume and multiply by .75 to find how much you need.

 

$ DUCATI DESMOSEDICI ENDURANCE TANK COMING SOON (INCLUDES STANDARD CAP, EXTERNAL VENT, NO LOCK)

$ DUCATI DESMOSEDICI STANDARD TANK COMING SOON (INCLUDES STANDARD CAP, EXTERNAL VENT, NO LOCK)

$420.00  DESMOSEDICI REAR FENDER (INCLUDES TITANIUM HARDWARE)

                                **shipping costs additional see below for information

$40.00     INSTALL LOCK FOR STANDARD CAP (INCLUDES 2 KEYS)

$200.00   CARBON COSMETIC PANELS

$490.00   PAINT AND CLEAR COAT FACTORY COLOR  (NEED A PAINTED PIECE OF BODY WORK FOR                                                MATCH, INCLUDES BASIC GRAPHICS)

$170.00  STANDARD REPLACEMENT CAP (NO LOCK)

$15.00    STANDARD CAP SEAL KIT (O-RING AND TEFLON FLAT SEAL)

ABOVE ARE THE USUAL OPTIONS

 

BELOW IS THE SPECIAL RACING APPLICATION HARDWARE

$480.00   ADDITIONAL CAPACITY INCREASE FROM 3-6 LITERS (THIS IS A SPECIAL ORDER,                                                TANK BECOMES .75" TO 1.3" TALLER)

$290.00   SINGLE DRYBREAK CAP INSTALLED, EXTERNAL VENT IS INCLUDED

$110.00   SINGLE DRYBREAK OPENING ONLY, NO CAP, EXTERNAL VENT IS INCLUDED (you supply own DB)

$590.00   DUAL DRYBREAK CAPS INSTALLED, EXTERNAL VENT IS INCLUDED

$240.00   DUAL DRYBREAK OPENING ONLY, NO CAPS, EXTERNAL VENT IS INCLUDED (you supply own DB's)

$35.00     DRYBREAK BOCK OFF PLATE

$5.00       DRYBREAK GASKET

$55.00    SINGLE DRYBREAK FUELCEL BAFFLE FOAM KIT INSTALLED

$65.00    DUAL DRYBREAK FUELCEL BAFFLE FOAM KIT INSTALLED

$230.00  STANDARD CAP TO DRYBREAK ADAPTER PLATE (INCLUDES CAP)

ONLINE TANK INSTALLATION INSTRUCTIONS HERE

ONLINE FOAM KIT INSTALLATION INSTRUCTIONS HERE

 

IMPORTANT SHIPPING INFORMATION

**Once your order is placed, an email will be sent to you with a shipping quote based on your Paypal account information. If you would like your purchase shipped to a different address or any other special instructions that may affect shipping costs, please email us with your information as soon as you place your order.

International shipments are typically shipped via U.S. Postal System and Domestic shipments via FedEx to ensure the best price and tracking information. Some countries have size limits, in those cases we use DB Shenker for shipping. Mostallorders for non-custom tanks are ready to ship within 2-3 weeks. If you are needing a tank immediately we can expedite the construction for a 15% fee and ship within 5 days using any shipping method you prefer, UPS, FedEx, Express Mail, etc. Email us if this is your need to make arrangements.

Solution Graphics

E-mail

Erospace Technologies Inc. 31220 La Baya Dr, Ste #104 Westlake Village,  CA  91362 USA 818-889-1542 PST Copyright 2010 ETI

 

 

web analytics